QUICK ANSWER
Door rubbing or sticking on one side? The track is probably out of line. Stop using the opener so the door doesn’t jam, and call us for a repair.
The track guides every roller. A track out of line by even a little can make the door bind, rub, or ride up on one side.
Why garage door tracks go out of line
Loose brackets
Constant vibration loosens bolts until the rail shifts.
Settling ground
Houston’s clay soil swells and shrinks, and a shifting slab can pull a track out of line.
An impact
A bumped car or a blown-in branch can bend the rail.

HOW AURA FIXES IT
We realign and tighten the track, replace any damaged section, and check the rollers and hinges that ride in it. Then we test the door with you. The price is set before work begins, and most track repairs are done in one visit.
Get today’s priceStraightening, tightening, or replacing the track
Sometimes the brackets just need tightening and the track needs aligning. Other times the rail is bent from an impact or storm, and straightening isn’t enough. We check the track with a level, look at the mounting on the wall and ceiling, and tell you whether a repair or a new section is the right call. A bent rail often points to a bigger problem, so see our page on bent track repair.
Signs of a garage door track problem
A gap between the roller and the track, a rail that bows in or out, or a door that scrapes on one side all point to a track issue. You may see shiny wear marks where a roller rubs, or hear a clunk at the same spot every time.
Ignore it and the door can jump out completely. If a roller has already left the track, see off-track repair and stop using the opener.
Houston soil, settling slabs, and garage door tracks
Houston’s clay soil swells in wet months and shrinks in droughts, and a slab that shifts a little can pull a track out of plumb. We see it a lot in older Meyerland and Bellaire homes and in newer builds in Missouri City and Richmond.
Neighbors call us because we fix the cause, not just the symptom. We re-plumb the vertical tracks, set the horizontal tracks at the right slope, and check the rollers and hinges before we finish.
WHY HOUSTON CHOOSES AURA
The garage door team Houston calls first.
Local shops in Houston.
Rated 5.0 from 58 Google reviews- Houston chooses Aura.Neighbors tell neighbors, and our phone shows it. Ranked #1 top rated in Houston, 2025. Our days fill up early, so call early to claim a time.
- Local, fast, and fairly priced.A family owned Houston team since 2003. We explain what failed in plain words and quote one price before work begins.
- Work you can trust.Uniformed technicians who keep the job tidy and run the door through its full travel with you before leaving. Our satisfaction guarantee backs every job.
Helpful details to share when you call
- Which side of the door rubs or sticks
- Whether the track looks bent or the brackets look loose
- Any recent impact, storm, or car bump
Garage door track repair in Houston: common questions
Can a bent track be straightened?
A small bend sometimes can. A kinked or crushed rail should be replaced, because reshaped metal can crack. We tell you which it is.
Why does my door rub on one side?
The track may be out of line or the brackets may be loose. Don’t force the door. Call us and we will check the alignment.
Should I lubricate garage door tracks?
No. Tracks should be clean and dry. Grease on the track collects dirt and can make rollers slide. Lubricate the rollers’ bearings, the hinges, and the springs instead.
How do I know if my track is loose or bent?
Close the door and look at the brackets that hold the vertical track to the wall. Loose bolts or a bracket that moves by hand means it’s loose. A rail that is kinked, flattened, or curved is bent and may need a new section.
Can you repair the track the same day?
Most alignment and bracket repairs are done on the first visit. If a rail section has to be replaced, we often have it on the truck. If not, we tell you before you approve the work.



