QUICK ANSWER
Door won’t close and the opener lights blink? Your safety sensors are probably out of line. Wipe both lenses and make sure nothing blocks them. If it still fails, call us.
Safety sensors sit near the floor on both sides of the door. A dirty, blocked, or crooked eye will keep the door from closing.
Why garage door sensors cause trouble
Dirty or blocked lenses
Dust, spider webs, and stored items block the beam.
A bumped bracket
A small knock moves a sensor out of line.
A frayed wire
Garage wiring wears from vibration, moisture, and pests.

HOW AURA FIXES IT
We clean, realign, and test both sensors, repair or replace wiring, and confirm the door reverses when it should. The price comes first, and most sensor repairs are done in one visit.
Get today’s priceHow garage door safety sensors work
Two small eyes send an invisible beam across the opening, and the door reverses if something breaks it. That is a federal safety feature on residential openers, so it should never be bypassed. Dirt, sun glare, a bumped bracket, or a loose wire can break the signal. We clean and realign the eyes, test the wiring, and replace a bad sensor. See also opener repair.
How to check your garage door sensors
Each sensor has a small light. On most openers, one glows steady when it has power and the other glows steady when it sees the beam. If one blinks or is off, the beam is blocked or the eyes are out of line. Wipe the lenses, clear anything in the path, and gently aim the sensors at each other.
Low afternoon sun can also blind a sensor on a west-facing garage. If the door closes in the morning but not at 5 pm, that’s a likely cause, and we can shade or reposition the eyes.
Sensor repair Houston families trust for safety
Families with kids and pets want the safety eyes working right, and they call the team their neighbors trust. We fix sensors every week in Cypress, Katy, Atascocita, and across Houston.
We clean and realign the eyes, repair chewed or loose wiring, and replace failed sensors. Then we run the auto-reverse test with you so you know the door will stop and reverse when it should.
WHY HOUSTON CHOOSES AURA
The garage door team Houston calls first.
Local shops in Houston.
Rated 5.0 from 58 Google reviews- Houston chooses Aura.Neighbors tell neighbors, and our phone shows it. Ranked #1 top rated in Houston, 2025. Our days fill up early, so call early to claim a time.
- Local, fast, and fairly priced.A family owned Houston team since 2003. We explain what failed in plain words and quote one price before work begins.
- Work you can trust.Uniformed technicians who keep the job tidy and run the door through its full travel with you before leaving. Our satisfaction guarantee backs every job.
Helpful details to share when you call
- Whether the opener lights blink
- Which side the sensor lens looks dirty or loose
- Whether the door closes if you hold the wall button
Garage door sensor repair in Houston: common questions
Why do the opener lights blink and the door won’t close?
The safety sensors are usually blocked, dirty, or out of line. Wipe both lenses and check that nothing is in the way, then call us if it keeps happening.
Can I bypass the sensors?
No. They are a safety feature that makes the door reverse if something is in the way. Bypassing them is unsafe. We fix the cause instead.
Are garage door sensors required?
Federal safety rules have required photo-eye or similar reversing protection on residential openers sold in the U.S. since 1993. They should never be removed or bypassed.
Can sun really stop my garage door from closing?
Yes. Strong direct sun can overwhelm the receiving sensor, especially on west-facing garages in summer. Repositioning or shading the sensor fixes it.
How much does garage door sensor repair cost?
It depends on whether the fix is an alignment, a wiring repair, or a new set of sensors. The estimate is free and you get one clear price before we start.



